Struct RunProperties 

pub struct RunProperties(/* private fields */);

Properties that control which tests should be run in integration test invocations.

Implementations

impl RunProperties

pub const RELOCATED: Self

pub const WITH_DEFAULT_FILTER: Self

pub const WITH_SKIP_CDYLIB_FILTER: Self

pub const WITH_MULTIPLY_TWO_EXACT_FILTER: Self

pub const CDYLIB_EXAMPLE_PACKAGE_FILTER: Self

pub const SKIP_SUMMARY_CHECK: Self

pub const EXPECT_NO_BINARIES: Self

pub const BENCHMARKS: Self

pub const BENCH_OVERRIDE_TIMEOUT: Self

Run ignored benchmarks with the with-bench-override profile.

pub const BENCH_TERMINATION: Self

Run ignored benchmarks with the with-bench-termination profile.

pub const BENCH_IGNORES_TEST_TIMEOUT: Self

Run benchmarks with the with-test-termination-only profile.

pub const RUN_IGNORED_ONLY: Self

Run ignored tests only (–run-ignored only), excluding slow timeout tests.

pub const TIMEOUT_RETRIES_PASS: Self

Run with with-timeout-retries-success profile, slow_timeout tests only. These tests time out but pass due to on-timeout=pass.

pub const TIMEOUT_RETRIES_FLAKY: Self

Run with with-timeout-retries-success profile, flaky slow timeout test only. This test fails twice then times out (passes) on the 3rd attempt.

pub const WITH_RETRIES: Self

Run with the with-retries profile. Flaky tests should pass after retries.

pub const WITH_TARGET_RUNNER: Self

Run with a target runner set. On Unix, segfaults are reported as regular failures because the passthrough runner doesn’t propagate signal info.

pub const WITH_TERMINATION: Self

Run with the with-termination profile. Tests should time out.

pub const WITH_TIMEOUT_SUCCESS: Self

Run with the with-timeout-success profile. test_slow_timeout passes (on-timeout = “pass”), others fail.

pub const ALLOW_SKIPPED_NAMES_IN_OUTPUT: Self

Allow skipped test names to appear in output (e.g., for replay which shows SKIP lines). Without this flag, verification fails if any skipped test name appears in the output.

pub const WITH_RETRIES_FLAKY_FAIL: Self

Run with the with-retries-flaky-fail profile. Flaky tests with flaky-result = "fail" should count as failures.

pub const WITH_CLI_FLAKY_RESULT_FAIL: Self

Run with --flaky-result fail CLI flag. All flaky tests should count as failures, regardless of per-test config.

pub const WITH_CLI_FLAKY_RESULT_PASS: Self

Run with --flaky-result pass CLI flag. No flaky tests should count as failures, even if config has flaky-result = "fail".

impl RunProperties

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> u64

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: u64) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: u64) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: u64) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl RunProperties

pub const fn iter(&self) -> Iter<RunProperties>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<RunProperties>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl Binary for RunProperties

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for RunProperties

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = RunProperties

The resulting type after applying the & operator.

impl BitAndAssign for RunProperties

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for RunProperties

fn bitor(self, other: RunProperties) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = RunProperties

The resulting type after applying the | operator.

impl BitOrAssign for RunProperties

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for RunProperties

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = RunProperties

The resulting type after applying the ^ operator.

impl BitXorAssign for RunProperties

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for RunProperties

fn clone(&self) -> RunProperties

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for RunProperties

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for RunProperties

fn default() -> RunProperties

Returns the “default value” for a type.

impl Extend<RunProperties> for RunProperties

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for RunProperties

const FLAGS: &'static [Flag<RunProperties>]

The set of defined flags.

type Bits = u64

The underlying bits type.

fn bits(&self) -> u64

Get the underlying bits value.

fn from_bits_retain(bits: u64) -> RunProperties

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn known_bits(&self) -> Self::Bits

Get the known bits from a flags value.

fn unknown_bits(&self) -> Self::Bits

Get the unknown bits from a flags value.

fn contains_unknown_bits(&self) -> bool

This method will return true if any unknown bits are set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn iter_defined_names() -> IterDefinedNames<Self>

Yield a set of all named flags defined by [Self::FLAGS].

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn truncate(&mut self)

where Self: Sized,

Remove any unknown bits from the flags.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call [Flags::insert] when value is true or [Flags::remove] when value is false.

fn clear(&mut self)

where Self: Sized,

Unsets all bits in the flags.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<RunProperties> for RunProperties

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl IntoIterator for RunProperties

type Item = RunProperties

The type of the elements being iterated over.

type IntoIter = Iter<RunProperties>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for RunProperties

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for RunProperties

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = RunProperties

The resulting type after applying the ! operator.

impl Octal for RunProperties

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for RunProperties

fn eq(&self, other: &RunProperties) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PublicFlags for RunProperties

type Primitive = u64

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub for RunProperties

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = RunProperties

The resulting type after applying the - operator.

impl SubAssign for RunProperties

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for RunProperties

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for RunProperties

impl Eq for RunProperties

impl StructuralPartialEq for RunProperties